SJ Worm Screw Jack
- SJ-15T Worm Screw Jack
- 1.Jack Model: SJ-15T 2. Screw Diam.: 50 mm 3. Screw Pitch: 8 mm 4. Static Load: Max 15 tons 5. Dynamic Load: Max 6.4 tons 6. Speed Ratio: 1/8 1/16 1/32 7. Lifting Speed: 75-1500 mm/min 8. Input Power: 0.61-2.69 hp 9. Max Input: 1500 rpm 10. Screw Type: trapezoidal screw 11. Stroke Range: Max 2800 mm 12. Top End: top plate, clevis end, threaded end, plain end 13. Power Source: Electric, Manual, Both
- Inquiry
SJ-15T Worm Screw Jack Detailed Information:
1. Model: SJ-15T
2. Screw Diam.: 50 mm
3. Screw Pitch: 8 mm
4. Static Load: Max 15 tons
5. Dynamic Load: Max 6.4 tons
6. Speed Ratio: 1/8 1/16 1/32
7. Lifting Speed: 75-1500 mm/min
8. Input Power: 0.61-2.69 hp
9. Max Input: 1500 rpm
10. Screw Type: trapezoidal screw
11. Stroke Range: Max 2800 mm
12. Top End: top plate, clevis end, threaded end, plain end
13. Power Source: Electric, Manual, Both
SJ-15T Worm Screw Jack Pictures:
SJ-15T Worm Screw Jack Specification:
SJ-15T Worm Screw Jack Dimensions:
SJ-15T Worm Screw Jack Ordering Information:
1: Jack Brand
SJ: "SIJIE" brand screw jack
2: Load Capacity
15T: 15 ton static load
Before selecting 15T, please check above SJ-15T worm screw jack specifications.
3: Screw Configuration & Mounting Orientation
US: Upright translating screw UK: Upright keyed screw UR: Upright rotating screw
IS: Inverted translating screw IK: Inverted keyed screw IR: Inverted rotating screw
Note: US,IS(Screw rotation,do axial motion) UK,IK(Screw anti-rotation,do axial motion) UR,IR(Screw fixed rotation,travelling nut do axial motion)
4: Lift Screw End Fittings:
5: Worm Shaft Input Types
A: left side worm shaft input.
B: right side worm shaft input.
C: double worm shaft input.
M1: left side motor flange direct input.
M2: right side motor flange direct input.
M3: left side motor flange direct input, right side worm shaft input.
M4: right side motor flange direct input, left side worm shaft input.
6: Gear Ratio:
SJ-15T jack gear ratios include 1/8, 1/16, 1/32.
1/8: Fast speed, 1mm travel length per full turn of worm shaft.
1/16: Middle speed, 0.5mm travel length per full turn of worm shaft.
1/32: Low speed, 0.25mm travel length per full turn of worm shaft.
7: Travel Stroke:
8: Accessories
N: Standard Jack, No additional accessories
P: Steel Cover
R: Rubber Bellow
Y: Hand Wheel
Other accessories, please check below picture
- Previous: SJ-20T Worm Screw Jack
- Next: SJ-10T Worm Screw Jack